Mackie Fader Last Step

Mackie Fader sends/receives pitch bend values for channel 1 to channel 8 (values 0-16383).

The range of values for Mackie faders in the Midi plugin are 0 to 127.

It seems that the conversion from 0 to 127 is not accurate at the last step.

When the fader arrives to 127, the pitch bend sends a value of 16256 instead of 16383. 

So the maximum value of 16383 is never sent from a mackie dial.

You are correct. I could do the conversion better.

You can, though, set the max value to 16383 for the dial, in which case it will send the whole range without conversion.

If I set the max value to 16383, the rotation of dial doesn't work.
Hovering the max value with the mouse cursor, a pop-up message is shown.
The message says "The value must be less or equal to 127" (in spanish).




The main problem I am facing is that I use the faders for setting the panorama in Cubase tracks, pressing the FLIP button. So I can set the panorama to R99 but never to R100 (R) because the value of 16383 is not sent.

Technically, the fader works with that setting, but it is unusably slow.

It should be fixed in this version. Use 127 as max value.

Thanks!

Now the midi value 127 sends the pitch bend value 16383, it's fixed.

I have set the maximum value to 16383, and the step to 64. It works perfectly with this configuration for panorama.

I will use values 0 to 127 for volume and 0 to 16383 for panorama.

Thanks again!!